Samsung Galaxy Note 3 recently got latest KitKat taste, Samsung rolling out XXUENF3 Android 4.4.2 KitKat official firmware. This firmware update includes Knox 2.0 and drivers for latest smartwatch support. At present this update is available for limited regions, if you are not belong to the OTA supported region you can use this guide to update now.
[alert]Disclaimer: Please follow this guide at your own risk. Thetechhacker will not be responsible if your device gets damaged during the process.[/alert]
- First backup all your contacts, call logs and SMS.
- Enable USB debugging mode from Settings->Applications->Development->USB debugging in your device.
- Install latest Galaxy Note 3 N900 drives on your computer.
Android 4.4.2 XXUENF3 Firmware Details
- Model: SM-N900
- Model name: GALAXY Note 3
- Country: India
- Version: Android 4.4.2
- Changelist: 1955999
- Build date: Mon, 23 Jun 2014 12:07:20 +0000
- Product Code: INU
- PDA: N900XXUENF3
- CSC: N900ODDENF1
- MODEM: N900DDUENF1
How To Update Galaxy Note 3 N900 On XXUENF3 Android 4.4.2 KitKat Official Firmware
2.Now enter into download mode by pressing and holding volume up+volume down and power buttons together.
3.After pressing buttons the device shows the Samsung logo or the Android Robo, Press Power again to confirm to enter into Download Mode.
5.Now open ODIN on your computer and connect Galaxy Note 3 N900 to your computer while the device is in the download Mode.
6.If your phone is connected successfully, one of the ID:COM boxes will turn yellow with the COM port number.
7.Click on “AP” / “PDA” to select the firmware file and then click on “Start” button to start the process of firmware update.
8.After successful flash/install the firmware the device will restart. Unplug the phone from your computer. It usually take 5 min time to boot after the firmware update.
For the confirmation go to Settings>>About phone to verify the firmware update.